band.NEW

Our straps use quick release pins so no tools are required.

1. Slide the band's quick release spring bar inwards.

2. Pull the current band away from the watch's body.

3. Insert one end of the new bands spring bar into the watch's lug

4. Slide the spring bar inwards and connect the new band.

Currently we just stock bands for Samsung watches.

Although Samsung watches come in different shapes and sizes, many of them use the same band width. As long as you have the proper width, you can alternate the bands however you want.

Nylon Sports Loop is a unique material that allows for air flow, making the strap breathable.

It is durable, comfortable, and built to last, with a luxurious finish that adds a modern touch to your watch.

Found a Samsung watch strap that you just cant live without? With our easy to use Apple connector you can have the best of both worlds.

1. Ensure you have the correct size Apple connector for your watch. We offer connectors for both 38/40mm and 42/44mm Apple watches.

2. Remove your currently strap by pressing and holding the quick release pins on either side of your current strap. Gently slide the strap out of the lugs, releasing it from the watch body.

3. Attach the Apple connector to your strap by lining up the Apple connector with the holes on your new strap, the connector will have a small groove that fits into the strap's hole. Slide the connector into place, ensuring it clicks in securely. The connector should sit flush with the band.

4. Attach the strap to your watch by holding your watch with the lugs facing you, slide the connected strap into the lugs of your Apple watch, making sure the quick release pin clicks into place. Double check the strap is securely attached before wearing.

5. Adjust the strap for your desired tightness, comfort and security. If it's a silicone, nylon or metal band, make sure it fits snugly, but not too tight.

You are all set to go!